[CLUE-Tech] Slack+PPP: LCP: timeout sending Config-Requests

[David J Jackson]

Dave --
Thanks for you reply.
pppsetup creates/modifies options, pap-secrets, ip-up, ip-down,
the connection is started with a script ppp-go.

Thanks,
David

Dave Hahn wrote:

> It won't hurt.  What script are you using to initiate the connection?
>
> -----Original Message-----
> From: clue-tech-admin at clue.denver.co.us
> [mailto:clue-tech-admin at clue.denver.co.us]On Behalf Of David Jackson
> Sent: Monday, April 29, 2002 10:57 AM
> To: clue-tech at clue.denver.co.us
> Cc: david.j.jackson at pickledbeans.com; dhahn at techangle.com
> Subject: RE: [CLUE-Tech] Slack+PPP: LCP: timeout sending Config-Requests
>
> David --
> Uncommenting "noauth" in options didn't make any difference.
> Maybe I should try creating a empty options and running pppsetup again?
>
> David
>
> > David --
> > Thanks, I give it a shot.
> >
> > David
> >
> >
> >
> >> You may need to uncomment the noauth option.  If memory serves,
> >> without it, your machine is asking your ISP  to authenticate itself to
> >> your machine. And, I expect, your ISPs machine isn't expecting to have
> >> to do that. :-)
> >>
> >> I'm not around my docs, so, this may be off base, but I *think* that's
> >> it.
> >>
> >> -----Original Message-----
> >> From: clue-tech-admin at clue.denver.co.us
> >> [mailto:clue-tech-admin at clue.denver.co.us]On Behalf Of David Jackson
> >> Sent: Monday, April 29, 2002 9:59 AM
> >> To: clue-tech at clue.denver.co.us
> >> Cc: fabian at jefferycann.com
> >>
> >
> >
> > Subject: [CLUE-Tech] Slack+PPP: LCP: timeout sending Config-Requests
> >>
> >>
> >> This one is driving me crazy, I've never had a problem with ppp
> >> connection on Slack-8 before. What's even more puzzling is It was
> >> working on an install which hung while trying to make bookdisk?
> >>
> >> But after *completing* a reinstall, it doesn't? I've tried PAP and
> >> CHAP (pap works on Debian and Redhat).
> >>
> >> Note it connect, but doesn't add routing for IP assigned by ISP?
> >>
> >> TIA,
> >> David
> >>
> >> I'm using a USRobotics external modem.
> >>
> >> Here's the error messages:
> >>
> >> slacker:root >> ppp-go
> >> /etc/ppp
> >> slacker:root >> Serial connection established.
> >> Using interface ppp0
> >> Connect: ppp0 <--> /dev/ttyS1
> >> sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71cdcf1e> <pcomp>
> >> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71cdcf1e>
> >> <pcomp> <accomp>] LCP: timeout sending Config-Requests
> >>
> >>
> >> Here's my options.
> >>
> >> lock
> >> defaultroute
> >> noipdefault
> >> modem
> >> /dev/ttyS1
> >> 57600
> >> crtscts
> >> # Uncomment the line below for more verbose error reporting:
> >> debug
> >> # If you have a default route already, pppd may require the other side
> >> # to authenticate itself, which most ISPs will not do.  To work around
> >> this, # uncomment the line below.  Note that this may have negative
> >> side effects # on system security if you allow PPP dialins.  See the
> >> docs in
> >> /usr/doc/ppp*
> >> # for more information.
> >> #noauth
> >> passive
> >> asyncmap 0
> >> name "david.jay.jackson"
> >>
> >>
> >>
> >>
> >> --
> >>
> >>
> >> _______________________________________________
> >> CLUE-Tech mailing list
> >> CLUE-Tech at clue.denver.co.us
> >> http://clue.denver.co.us/mailman/listinfo/clue-tech
> >>
> >> _______________________________________________
> >> CLUE-Tech mailing list
> >> CLUE-Tech at clue.denver.co.us
> >> http://clue.denver.co.us/mailman/listinfo/clue-tech
> >
> >
> > --
> >
> >
> > _______________________________________________
> > CLUE-Tech mailing list
> > CLUE-Tech at clue.denver.co.us
> > http://clue.denver.co.us/mailman/listinfo/clue-tech
>
> --
>
> _______________________________________________
> CLUE-Tech mailing list
> CLUE-Tech at clue.denver.co.us
> http://clue.denver.co.us/mailman/listinfo/clue-tech
>
> _______________________________________________
> CLUE-Tech mailing list
> CLUE-Tech at clue.denver.co.us
> http://clue.denver.co.us/mailman/listinfo/clue-tech