[CLUE-Tech] Marginally OT: VPN client

[Frank Whiteley]

----- Original Message -----
From: "Sean LeBlanc" <seanleblanc at americanisp.net>
To: <clue-tech at clue.denver.co.us>
Sent: Saturday, August 30, 2003 12:52
Subject: Re: [CLUE-Tech] Marginally OT: VPN client


> On 08-13 09:24, Frank Whiteley wrote:
> > Also, any chance you are routing a public subnet and private IP space on
> > this C678 using eth0 and vipX?  Is it in routed or bridged mode?
> >
> > Frank Whiteley
> > Greeley
>
> Thanks for all the input, guys.
>

Sean,

So is that a no?

If it's in routed mode and you are running public and private subnets over
eth0 and a vipX, you will need to set the wan side IP for it to NAT and
route at the same time.  It doesn't work when the WAN side IP is dynamically
assigned, even if static.  (C675 worked by default BTW, but later CBOS
version may have affected this also).  The exact syntax may vary slightly by
CBOS version.

ena
cbos#set interface wan0-0 outside-ip XXX.XXX.XXX.XXX<enter>
write
reboot

I'm not sure whether this also applies to bridged mode of operations for the
C678, as we don't do this.  Personally, I'd dump the Linksys for a number of
reasons.  The C678 will support four subnets quite well.

Regards,

Frank Whiteley