[CLUE-Tech] Do I have a bad tape?

[Jeff Cann]

On Sunday 21 December 2003 12:57 pm, Dave Hahn wrote:
> The tape drive is being recognized as /dev/ht0 (ide tape 0).  What do
> you get is you point mt at /dev/ht0?

This (buried at the bottom of original post) :

> >-- ide-tape ---
> ># /sbin/insmod ide-tape
> ># mt -f /dev/ht0 rewind
> >/dev/ht0: Device or resource busy
> >
> ># dmesg | tail -3
> >ide-tape: Block location is unknown to the tape
> >ide-tape: ht0: I/O error, pc =  0, key =  3, asc = 52, ascq =  0
> >ide-tape: ht0: drive not ready
> >


> ># /sbin/rmmod ide-tape
> >
> >--- scsi ide ---
> ># /sbin/insmod scsi_mod
> >Using /lib/modules/2.4.20-20.9/kernel/drivers/scsi/scsi_mod.o
> >[root at jumanji root]# /sbin/insmod ide-scsi
> >Using /lib/modules/2.4.20-20.9/kernel/drivers/scsi/ide-scsi.o
> >[root at jumanji root]#  mt -f /dev/st0 rewind
> >/dev/st0: Input/output error
> >
> ># dmesg | tail -10
> >SCSI subsystem driver Revision: 1.00
> >hdd: attached ide-scsi driver.
> >scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> >  Vendor: HP        Model: COLORADO 5GB      Rev: 2.04
> >  Type:   Sequential-Access                  ANSI SCSI revision: 02
> >st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
> >Attached scsi tape st0 at scsi0, channel 0, id 0, lun 0
> >
> >
> >--
> >http://isuma.org/
> >_______________________________________________
> >CLUE-Talk mailing list
> >Post messages to: CLUE-Talk at clue.denver.co.us
> >Unsubscribe or manage your options:
> > http://clue.denver.co.us/mailman/listinfo/clue-talk
> >
> >_______________________________________________
> >CLUE-Tech mailing list
> >Post messages to: CLUE-Tech at clue.denver.co.us
> >Unsubscribe or manage your options:
> > http://clue.denver.co.us/mailman/listinfo/clue-tech
>
> _______________________________________________
> CLUE-Tech mailing list
> Post messages to: CLUE-Tech at clue.denver.co.us
> Unsubscribe or manage your options:
> http://clue.denver.co.us/mailman/listinfo/clue-tech

-- 
http://isuma.org/