[CLUE-Tech] Frustration with ATI's "drivers"
Jeremy Huber
jhuber at fallenknight.org
Mon Mar 24 17:15:19 MST 2003
Go check out http://gatos.sf.net They've got a pretty good setup for ATI
(or so I've been told).
Jeremy
----- Original Message -----
From: "Chris" <tuba_man at attbi.com>
To: <clue-tech at clue.denver.co.us>
Sent: Monday, March 24, 2003 4:57 PM
Subject: [CLUE-Tech] Frustration with ATI's "drivers"
> I just bought a Radeon 9700 Pro, and I'm having trouble with the
> drivers. Everything works fine, except for 3d acceleration. The .rpm
> from ATI's site seems to install everything correctly except for
> libglx.a (apparently just for the GLX extension) and DRI fails too. I'm
> running redhat 8 and Xfree86 4.2.0.
>
> I've attached the log and config for X, is there anything else I should
> add to those two?
>
> Suggestions or reliable resources I could use?
>
----------------------------------------------------------------------------
----
>
> XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 23 January 2002
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.18-11smp i686 [ELF]
> Build Host: daffy.perf.redhat.com
>
> Module Loader present
> OS Kernel: Linux version 2.4.20 (root at zeus) (gcc version 3.2 20020903 (Red
Hat Linux 8.0 3.2-7)) #11 Mon Mar 24 08:57:38 MST 2003 PF
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Mar 24 09:56:39 2003
> (==) Using config file: "/etc/X11/XF86Config-4"
> (==) ServerLayout "Server Layout"
> (**) |-->Screen "Screen0" (0)
> (**) | |-->Monitor "Monitor0"
> (**) | |-->Device "ATI Graphics Adapter"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc101"
> (**) XKB: model: "pc101"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (==) Keyboard: CustomKeycode disabled
> (WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/local/".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
> (**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/us
r/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/
X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X
11/fonts/100dpi/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> (II) Open APM successful
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.1
> XFree86 Video Driver: 0.5
> XFree86 XInput driver : 0.3
> XFree86 Server Extension : 0.1
> XFree86 Font Renderer : 0.3
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x8001002c, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1106,3099 card 0000,0000 rev 00 class 06,00,00 hdr
00
> (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr
01
> (II) PCI: 00:0b:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr
00
> (II) PCI: 00:0c:0: chip 1102,0002 card 1102,8061 rev 07 class 04,01,00 hdr
80
> (II) PCI: 00:0c:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr
80
> (II) PCI: 00:11:0: chip 1106,3074 card 1106,0000 rev 00 class 06,01,00 hdr
80
> (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr
00
> (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr
00
> (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr
00
> (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr
00
> (II) PCI: 01:00:0: chip 1002,4e44 card 1002,0002 rev 00 class 03,00,00 hdr
80
> (II) PCI: 01:00:1: chip 1002,4e64 card 1002,0003 rev 00 class 03,80,00 hdr
00
> (II) PCI: End of PCI scan
> (II) LoadModule: "scanpci"
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (II) Host-to-PCI bridge:
> (II) PCI-to-ISA bridge:
> (II) PCI-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
> (II) Bus 1 I/O range:
> [0] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
> [1] -1 0x0000c400 - 0x0000c4ff (0x100) IX[B]
> [2] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
> [3] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
> (II) Bus 1 prefetchable memory range:
> [0] -1 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
> (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus -1 I/O range:
> (II) Bus -1 non-prefetchable memory range:
> (II) Bus -1 prefetchable memory range:
> (--) PCI:*(1:0:0) ATI unknown chipset (0x4e44) rev 0, Mem @ 0xd0000000/27,
0xe5000000/16, I/O @ 0xc000/8
> (--) PCI: (1:0:1) ATI unknown chipset (0x4e64) rev 0, Mem @ 0xd8000000/27,
0xe5010000/16
> (II) Addressable bus resource ranges are
> [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> [0] -1 0xe7000000 - 0xe70003ff (0x400) MX[B]
> [1] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
> [2] -1 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
> [3] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
> [4] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> [5] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
> [6] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [7] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [8] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
> [9] -1 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
> [10] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
> [11] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [12] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> [13] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0xe7000000 - 0xe70003ff (0x400) MX[B]
> [1] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
> [2] -1 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
> [3] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
> [4] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> [5] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
> [6] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [7] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [8] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
> [9] -1 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
> [10] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
> [11] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [12] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> [13] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe7000000 - 0xe70003ff (0x400) MX[B]
> [6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
> [7] -1 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
> [8] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
> [9] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> [10] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
> [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [13] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [14] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [15] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
> [16] -1 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
> [17] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
> [18] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [19] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> [20] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.1
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.1.10
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.3
> (II) Loading font FreeType
> (II) LoadModule: "glx"
> (WW) Warning, couldn't open module glx
> (II) UnloadModule: "glx"
> (EE) Failed to load module "glx" (module does not exist, 0)
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "fglrx"
> (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
> (II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
> compiled for 4.2.0, module version = 2.5.1
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.5
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.3
> (II) FireGL8700/8800: Driver for chipset: ATI R200 QH (AGP),
> ATI R200 QL (AGP), ATI R200 QT (AGP), ATI R200 BB (AGP),
> Radeon RV250 Id (R9000), Radeon RV250 Ie (R9000),
> Radeon RV250 If (R9000), Radeon RV250 Ig (R9000),
> Radeon RV250 Ld (M9), Radeon RV250 Le (M9), Radeon RV250 Lf (M9),
> Radeon RV250 Lg (M9), Radeon R300 AD (R9500), Radeon R300 AE (R9500),
> Radeon R300 AF (R9500), Radeon R300 AG (Fire GL Z1/X1),
> Radeon R300 ND (R9700 Pro), Radeon R300 NE (R9700/R9500Pro),
> Radeon R300 NF (Unknown), Radeon R300 NG (Fire GL X1)
> (II) Primary Device is: PCI 01:00:0
> (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1)
found
> (--) Chipset Radeon R300 ND (R9700 Pro) found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe7000000 - 0xe70003ff (0x400) MX[B]
> [6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
> [7] -1 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
> [8] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
> [9] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> [10] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
> [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [13] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [14] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [15] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
> [16] -1 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
> [17] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
> [18] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [19] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> [20] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
> (II) fglrx(0): pEnt->device->identifier=0x081f27b8
> (II) resource ranges after probing:
> [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0xe7000000 - 0xe70003ff (0x400) MX[B]
> [6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
> [7] -1 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
> [8] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
> [9] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> [10] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
> [11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [16] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [17] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [18] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
> [19] -1 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
> [20] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
> [21] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [22] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> [23] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
> [24] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [25] 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) fglrx(0): === [R200PreInit] === begin
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) fglrx(0): PCI bus 1 card 0 func 0
> (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
> (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
> (==) fglrx(0): Default visual is TrueColor
> (**) fglrx(0): Option "NoAccel" "no"
> (**) fglrx(0): Option "NoDRI" "no"
> (**) fglrx(0): Option "Capabilities" "0x00000000"
> (**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
> (**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
> (**) fglrx(0): Option "OpenGLOverlay" "off"
> (**) fglrx(0): Option "VideoOverlay" "on"
> (**) fglrx(0): Option "DesktopSetup" "0x00000000"
> (**) fglrx(0): Option "Display2" "0"
> (**) fglrx(0): Option "HSync2" "unspecified"
> (**) fglrx(0): Option "VRefresh2" "unspecified"
> (==) fglrx(0): RGB weight 888
> (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
> (**) fglrx(0): Gamma Correction for I is 0x00000000
> (**) fglrx(0): Gamma Correction for II is 0x00000000
> (==) fglrx(0): Buffer Tiling is ON
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) fglrx(0): initializing int10
> (II) fglrx(0): Primary V_BIOS segment is: 0xc000
> (--) fglrx(0): Chipset: "Radeon R300 ND (R9700 Pro)" (Chipset = 0x4e44)
> (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
> (--) fglrx(0): board vendor info: original ATI grafics adapter
> (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
> (--) fglrx(0): MMIO registers at 0xe5000000
> (--) fglrx(0): ChipRevID = 0x02
> (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
> (II) fglrx(0): board/chipset is supported by this driver (original ATI
board)
> (**) fglrx(0): Overlay disabled
> (II) fglrx(0): Primary Display == Type 1
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/X11R6/lib/modules/libi2c.a
> (II) Module i2c: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.2.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) fglrx(0): I2C bus "DDC" initialized.
> (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000;
xclk=31000
> (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) fglrx(0): Validating modes on Primary head (DDCType: 3) ---------
> (II) fglrx(0): I2C device "DDC:ddc2" registered.
> (II) fglrx(0): I2C device "DDC:ddc2" removed.
> (II) fglrx(0): I2C device "DDC:ddc2" registered.
> (II) fglrx(0): I2C device "DDC:ddc2" removed.
> (II) fglrx(0): I2C device "DDC:ddc2" registered.
> (II) fglrx(0): I2C device "DDC:ddc2" removed.
> (II) fglrx(0): Monitor0: Using hsync range of 31.50-79.00 kHz
> (II) fglrx(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
> (II) fglrx(0): Clock range: 20.00 to 400.00 MHz
> (II) fglrx(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
> (II) fglrx(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
> (II) fglrx(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
> (II) fglrx(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
> (II) fglrx(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
> (II) fglrx(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
> (II) fglrx(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
> (II) fglrx(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
> (II) fglrx(0): Not using default mode "1280x960" (hsync out of range)
> (II) fglrx(0): Not using default mode "640x480" (hsync out of range)
> (II) fglrx(0): Not using default mode "1280x1024" (hsync out of range)
> (II) fglrx(0): Not using default mode "640x512" (hsync out of range)
> (II) fglrx(0): Not using default mode "1280x1024" (hsync out of range)
> (II) fglrx(0): Not using default mode "640x512" (hsync out of range)
> (II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
> (II) fglrx(0): Not using default mode "800x600" (hsync out of range)
> (II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
> (II) fglrx(0): Not using default mode "800x600" (hsync out of range)
> (II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
> (II) fglrx(0): Not using default mode "800x600" (hsync out of range)
> (II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
> (II) fglrx(0): Not using default mode "800x600" (hsync out of range)
> (II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
> (II) fglrx(0): Not using default mode "896x672" (hsync out of range)
> (II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
> (II) fglrx(0): Not using default mode "896x672" (hsync out of range)
> (II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
> (II) fglrx(0): Not using default mode "928x696" (hsync out of range)
> (II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
> (II) fglrx(0): Not using default mode "928x696" (hsync out of range)
> (II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
> (II) fglrx(0): Not using default mode "960x720" (hsync out of range)
> (II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
> (II) fglrx(0): Not using default mode "960x720" (hsync out of range)
> (II) fglrx(0): Not using default mode "1400x1050" (hsync out of range)
> (II) fglrx(0): Not using default mode "700x525" (hsync out of range)
> (II) fglrx(0): Not using default mode "1400x1050" (hsync out of range)
> (II) fglrx(0): Not using default mode "700x525" (hsync out of range)
> (II) fglrx(0): Not using default mode "1920x1200" (hsync out of range)
> (II) fglrx(0): Not using default mode "960x600" (hsync out of range)
> (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
> (**) fglrx(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
> (II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync
> (**) fglrx(0): Default mode "1152x864": 121.5 MHz, 77.5 kHz, 85.1 Hz
> (II) fglrx(0): Modeline "1152x864" 121.50 1152 1216 1344 1568 864 865
868 911 +hsync -vsync
> (**) fglrx(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
> (II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync
> (**) fglrx(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
> (**) fglrx(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 -hsync -vsync
> (==) fglrx(0): DPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 ANSI C Emulation, version 0.1
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.5
> (**) fglrx(0): NoAccel = NO
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (**) fglrx(0): NoDRI = NO
> (II) Loading sub module "fglrxdrm"
> (II) LoadModule: "fglrxdrm"
> (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
> (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
> compiled for 4.2.0, module version = 2.5.1
> ABI class: XFree86 Server Extension, version 0.1
> (II) fglrx(0): Depth moves disabled by default
> (**) fglrx(0): Capabilities: 0x00000000
> (==) fglrx(0): cpuFlags: 0x0000000f
> (==) fglrx(0): cpuSpeedMHz: 0x000005c0
> (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
> (II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
> [1] 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
> [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [7] -1 0xe7000000 - 0xe70003ff (0x400) MX[B]
> [8] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
> [9] -1 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
> [10] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
> [11] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> [12] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
> [13] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [16] 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
> [17] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [18] -1 0x00000000 - 0x000000ff (0x100) IX[B]
> [19] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [20] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [21] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
> [22] -1 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
> [23] -1 0x0000d800 - 0x0000d807 (0x8) IX[B]
> [24] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [25] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> [26] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
> [27] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [28] 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) fglrx(0): UMM area: 0xd0700000 (size=0x07900000)
> (II) fglrx(0): driver needs XFree86 version: 4.2.x
> (II) fglrx(0): detected XFree86 version: 4.2.0
> (WW) fglrx(0): DRI initialization failed!
> (II) fglrx(0): front buffer: 0xd0000000
> (II) fglrx(0): offscreen: 0xd0500000
> (II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x08000000
> (==) fglrx(0): Write-combining range (0xd0000000,0x8000000)
> (II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
> (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color
buffer - assumption)
> (**) fglrx(0): Option "BackingStore"
> (**) fglrx(0): Backing store enabled
> (==) fglrx(0): Silken mouse enabled
> (II) fglrx(0): Using hardware cursor (scanline 1024)
> (II) fglrx(0): Largest offscreen area available: 1280 x 7159
> (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> Solid Horizontal and Vertical Lines
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 32 128x128 slots
> 32 256x256 slots
> 16 512x512 slots
> (II) fglrx(0): Acceleration enabled
> (II) fglrx(0): Direct rendering disabled
> (II) Loading extension FGLRXEXTENSION
> Symbol __glXActiveScreens from module
/usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
> Symbol __glXActiveScreens from module
/usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
> (II) Setting vga for screen 0.
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (**) Option "Protocol" "ImPS/2"
> (**) Mouse1: Protocol: "ImPS/2"
> (**) Option "CorePointer"
> (**) Mouse1: Core Pointer
> (**) Option "Device" "/dev/input/mice"
> (**) Option "Buttons" "5"
> (**) Option "ZAxisMapping" "4 5"
> (**) Mouse1: ZAxisMapping: buttons 4 and 5
> (**) Mouse1: Buttons: 5
> (II) Keyboard "Keyboard1" handled by legacy driver
> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
> Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/,
removing from list!
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
>
----------------------------------------------------------------------------
----
> # **********************************************************************
> # DRI Section
> # **********************************************************************
> Section "dri"
> # Access to OpenGL ICD is allowed for all users:
> Mode 0666
> # Access to OpenGL ICD is restricted to a specific user group:
> # Group 100 # users
> # Mode 0660
> EndSection
>
> # **********************************************************************
> # Module section -- this section is used to specify
> # which dynamically loadable modules to load.
> # **********************************************************************
> #
> Section "Module"
>
> Load "dbe" # Double buffer extension
>
> SubSection "extmod"
> Option "omit xfree86-dga" # don't initialise the DGA extension
> EndSubSection
>
> # This loads the Type1 and FreeType font modules
> Load "type1"
> Load "freetype"
>
> # This loads the GLX module
> Load "glx" # libglx.a
> Load "dri" # libdri.a
>
> EndSection
>
> # **********************************************************************
> # Files section. This allows default font and rgb paths to be set
> # **********************************************************************
>
> Section "Files"
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
>
> FontPath "/usr/X11R6/lib/X11/fonts/local/"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
>
> # The module search path. The default path is shown here.
>
> # ModulePath "/usr/X11R6/lib/modules"
>
> EndSection
>
> # **********************************************************************
> # Server flags section.
> # **********************************************************************
>
> Section "ServerFlags"
>
> EndSection
>
> # **********************************************************************
> # Input devices
> # **********************************************************************
>
> # **********************************************************************
> # Core keyboard's InputDevice section
> # **********************************************************************
>
> Section "InputDevice"
>
> Identifier "Keyboard1"
> Driver "Keyboard"
> Option "AutoRepeat" "500 30"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc101"
> Option "XkbLayout" "us"
>
> EndSection
>
>
> # **********************************************************************
> # Core Pointer's InputDevice section
> # **********************************************************************
>
> Section "InputDevice"
>
> # Identifier and driver
>
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "ImPS/2"
> Option "ZAxisMapping" "4 5"
> Option "Device" "/dev/input/mice"
> Option "Buttons" "5"
>
> EndSection
>
>
> # **********************************************************************
> # Monitor section
> # **********************************************************************
>
> # Any number of monitor sections may be present
>
> ###### I'm actually using a Sony CPD-200GS, but haven't looked up the
> ###### freqencies yet. These are, however, well within its capabilities.
>
> Section "Monitor"
> Identifier "Monitor0"
> HorizSync 31.5 - 79.0
> VertRefresh 50 - 100
> EndSection
>
>
> # **********************************************************************
> # Graphics device section
> # **********************************************************************
>
>
> # === ATI device section ===
>
> Section "Device"
> Identifier "ATI Graphics Adapter"
> Driver "fglrx"
> # === disable PnP Monitor ===
> #Option "NoDDC"
> # === disable/enable XAA/DRI ===
> Option "no_accel" "no"
> Option "no_dri" "no"
> # === Fire GL DDX driver module specific settings ===
> # === Screen Management ===
> Option "DesktopSetup" "0x00000000"
> Option "Display2" "0"
> Option "HSync2" "unspecified"
> Option "VRefresh2" "unspecified"
> Option "GammaCorrectionI" "0x00000000"
> Option "GammaCorrectionII" "0x00000000"
> # === OpenGL specific profiles/settings ===
> Option "Capabilities" "0x00000000"
> # === Video Overlay for the Xv extension ===
> Option "VideoOverlay" "on"
> # === OpenGL Overlay ===
> # Note: When OpenGL Overlay is enabled, Video Overlay
> # will be disabled automatically
> Option "OpenGLOverlay" "off"
> BusID "PCI:1:0:0" # vendor=1002, device=4e44
> Screen 0
> EndSection
>
> # **********************************************************************
> # Screen sections
> # **********************************************************************
>
>
> Section "Screen"
> Identifier "Screen0"
> Device "ATI Graphics Adapter"
> Monitor "Monitor0"
> DefaultDepth 24
> Option "backingstore"
>
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0 # initial origin if mode is smaller than desktop
> # Virtual 1280 1024
> EndSubsection
> EndSection
>
> # **********************************************************************
> # ServerLayout sections.
> # **********************************************************************
>
>
> Section "ServerLayout"
>
> Identifier "Server Layout"
> Screen "Screen0"
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
>
> EndSection
>
> ### EOF ###
>
More information about the clue-tech
mailing list