[CLUE-Tech] Port Forwarding / routing w/ cisco 678

[Dave Price]

On Wed, Apr 14, 2004 at 06:45:45PM -0600, Frank Whiteley wrote:
> Can't recall if IP NAT Outside IP shows without adding it specifically.
> 
> Try
> 
> ena
> show nvram
> 
> And see if your static IP is listed as
> IP NAT Outside IP = 64.65.162.63
> 
> If not, it should be.
> 
> There are a couple of NAT/subnet routing issues with public/private IP space
> that are solved by this
> 
> ena
> set int wan0-0 outside-ip 64.65.162.63
> write
> reboot
> 
> Then try checking again and the line will be there.
Frank,

Added the line as above. 
<snip>
cbos#sho nvram
Warning: traffic may pause while NVRAM is being accessed
[[ PPP Device Driver = Section Start ]]
PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not
Required,Negotiable,IP,0.0.0.0
PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not
Required,Negotiable,IP,0.0.0.0
PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not
Required,Negotiable,IP,0.0.0.0
PPP Port User Name = 00, e63 at megacentralden
PPP Port User Password = 00, ****
[[ IP Routing = Section Start ]]
IP NAT = enabled
IP Multicast Forwarding = disabled
IP Port RIP Send Responses = 00, disabled
IP Port RIPv2 Send Type = 00, donotsend
IP Port RIPv2 Receive Type = 00, donotreceive
IP Port RIP Send Responses = 01, disabled
IP Port RIPv2 Send Type = 01, donotsend
IP Port RIPv2 Receive Type = 01, donotreceive
IP NAT Entry = 10.0.0.2, 22, 64.65.162.63, 22, tcp;10.0.0.2, 80,
64.65.162.63, 80, tcp;
IP NAT Outside IP = 64.65.162.63
[[ WEB = Section Start ]]
WEB = disabled
[[ CBOS = Section Start ]]
NSOS Enable Password = n_j547/
NSOS Root Password = n_j547/
[[ ATM WAN Device Driver = Section Start ]]
ATM WAN Virtual Connection Parms = 00, 0, 32, 0
[[ DHCP = Section Start ]]
DHCP Server = enabled
</snip>
...Still no joy ... now I get a password prompt when I try to bring up a
page at 64.65.162.63

Any other suggestions?

aloha,
dave