[clue-tech] kernel drivers (linux kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } errors)

Tue Jan 3 22:28:05 MST 2006

Hi, while googling about this error (linux kernel: hde: drive_cmd:
status=0x51 { DriveReady SeekComplete Error }) I came upon these
postings in your list:

http://clue.denver.co.us/pipermail/clue-tech/2004-August/010916.html
http://clue.denver.co.us/pipermail/clue-tech/2004-August/010925.html
http://clue.denver.co.us/pipermail/clue-tech/2004-August/010927.html
http://clue.denver.co.us/pipermail/clue-tech/2004-August/010930.html
http://clue.denver.co.us/pipermail/clue-tech/2004-August/010931.html
http://clue.denver.co.us/pipermail/clue-tech/2004-August/010937.html
http://clue.denver.co.us/pipermail/clue-tech/2004-August/010939.html

However I don't have a VIA chipset, I am running my HDs from this ATA
controller: http://www.compusa.com/products/product_info.asp?product_code=305320&pfp=BROWSE
and am getting the following errors in my system log and am running
Suse 9.1 Pro:

Jan 3 15:45:05 linux kernel: hde: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 3 15:45:05 linux kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
Jan 3 15:45:05 linux kernel: hdf: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Jan 3 15:45:05 linux kernel: hdf: drive_cmd: error=0x04 { DriveStatusError }
Jan 3 15:45:05 linux [powersave_proxy][2336]: WARNING: hdparm returned error 5
Jan 3 15:45:05 linux kernel: hdf: task_no_data_intr: status=0x51 {
DriveReady SeekComplete Error }
Jan 3 15:45:05 linux kernel: hdf: task_no_data_intr: error=0x04 {
DriveStatusError }

Both drives in question have passed fsck without errors and have
passed SMART testing (don't have logs for fsck due to it running in
recovery mode but I do have SMART logs shown below):

linux:/home/hexstar # smartctl -a /dev/hde
smartctl version 5.30 Copyright (c) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: WDC WD3000JB-00KFA0
Serial Number: WD-WMAMR1422138
Firmware Version: 08.05J08
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jan 3 20:01:16 2006 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x84) Offline data collection activity was
suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (9600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 116) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 188 187 021 Pre-fail Always - 5575
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 86
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 253 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 33
10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 85
194 Temperature_Celsius 0x0022 124 100 000 Old_age Always - 26
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

That was hde...now for hdf....

linux:/home/hexstar # smartctl -a -s on /dev/hdf
smartctl version 5.30 Copyright (c) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: Maxtor 91728D8
Serial Number: A809D48C
Firmware Version: GAS54112
Device is: In smartctl database [for details use: -P show]
ATA Version is: 4
ATA Standard is: ATA/ATAPI-4 T13 1153D revision 17
Local Time is: Tue Jan 3 20:02:32 2006 PST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity was
never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x0f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
No Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.

SMART Attributes Data Structure revision number: 6
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 253 240 000 Pre-fail Always - 446677048288
3 Spin_Up_Time 0x0027 204 204 063 Pre-fail Always - 58
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 258
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 88631
8 Seek_Time_Performance 0x0027 249 247 187 Pre-fail Always - 205058919474216
9 Power_On_Minutes 0x0032 206 206 000 Old_age Always - 16533h+19m
10 Spin_Retry_Count 0x002b 253 252 223 Pre-fail Always - 54
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 57
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 334
199 UDMA_CRC_Error_Count 0x0008 199 200 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 423085
201 Soft_Read_Error_Rate 0x000a 253 250 000 Old_age Always - 47245089760
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 449504
203 Run_Out_Cancel 0x000a 253 252 000 Old_age Always - 449504
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 449504
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 449504
206 Flying_Height_Measurement0x0026 224 224 000 Old_age Always - 33406255628354
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 54
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 54
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0

Warning: device does not support Error Logging
Error SMART Error Log Read failed: Input/output error
Smartctl: SMART Error Log Read Failed
Warning: device does not support Self Test Logging
Error SMART Error Self-Test Log Read failed: Input/output error
Smartctl: SMART Self Test Log Read Failed

Can I ignore this error? What is this error? Should I do anything?
_______________________________________________
CLUE-tech mailing list
CLUE-tech at cluedenver.org
http://cluedenver.org/mailman/listinfo/clue-tech