[clue-tech] pcmcia question

[Collins Richey]

On 9/17/06, Collins Richey <crichey at gmail.com> wrote:
> On 9/17/06, Jeff Cann <jccann at gmail.com> wrote:
> > At the clue admin meeting yesterday, folks talked about the popularlity
> > of [k]ubuntu at our last install fest.
> >
> > I loaded kubuntu 6.06.1 LTS and besides networking... it's been
> > relatively cool.  I definitely like the sleeker KDE menus.  I always
> > thought default KDE [or Red Hat / Fedora's config] were too bloated with
> > apps I never use.
> >
> > During install, kubuntu did not properly detect my Motorola WN825G.  I
> > can understand this because under Fedora Core 3/4, I was using
> > NdisWrapper and the windows drivers.  I'll come back to this issue later.
> >
> > But, I thought my [wired] Linksys pcmcia card would be autodetected.  It
> > was not and it appears that the problem is within the /etc/pcmcia/config
> > file.  The kernel is telling the cardmgr that this card is pcnet_cs.
> > But, when pcnet_cs module tries to use it, it reports in the system log
> > that:
> >
> > Sep 16 23:05:46 zanobi kernel: [  821.423109] pccard: card ejected from
> > slot 0
> > Sep 16 23:05:57 zanobi kernel: [  832.073202] pccard: PCMCIA card
> > inserted into slot 1
> > Sep 16 23:05:57 zanobi kernel: [  832.073575] pcmcia: registering new
> > device pcmcia1.0
> > Sep 16 23:05:57 zanobi kernel: [  832.135580] pcnet_cs: this is an
> > AX88190 card!
> > Sep 16 23:05:57 zanobi kernel: [  832.135588] pcnet_cs: use axnet_cs
> > instead.
> >
> > Fair enough - I changed the binding in the card database
> > [/etc/pcmcia/config] :
> >
> > card "LinkSys Network Everywhere NP100"
> >   version "Network Everywhere", "Fast Ethernet 10/100 PC Card"
> >   #manfid: 0x0149, 0xc1ab
> >   #bind "pcnet_cs"
> >   bind "axnet_cs"
> >
> > I then restarted the cardmgr.  Still no joy and then I realized I needed
> > to rmmod the pcnet_cs module and did a modprobe axnet_cs.  After I did
> > this, the card works like a champ, until I did a test restart.  The test
> > restart [despite my change to the pcmcia database] *still* reloaded the
> > pcnet_cs module.  Now, I'm confused.
> >
> > I know I can change /etc/modules and load the axnet_cs module at boot.
> > This seems like a hack as it really is pcmcia cardmgr that is the
> > problem [google was not too much help on this, btw].
> >
> > I'm wondering why pcnet_cs was loaded after the reboot since cardmgr
> > should be loading it.  I grep'd kubuntu's /etc/init.d and did not see a
> > reference to pcnet.
> >
> > My other thought is that the pcmcia cardmgr is loading another card.
> > I'm not sure where the kernel or the cardmgr is getting the card
> > definition [e.g., LinkSys Network Everywhere NP100].
> >
> > I appreciate any clues.  It's been an interesting mystery so far.
> >
> > Jeff
> > <http://ndiswrapper.sourceforge.net/>
> > _______________________________________________
> > clue-tech mailing list
> > clue-tech at cluedenver.org
> > http://www.cluedenver.org/mailman/listinfo/clue-tech
> >
>
> There is quite a lot of traffic on this topic on forums. This one
> looks possible for you
>
> http://www.ubuntuforums.org/showthread.php?t=244313&highlight=Linksys+pcmcia
>
> Sorry, I don't know much about pmcia.
>
> --
> Collins Richey
>      If you fill your heart with regrets of yesterday and the worries
>      of tomorrow, you have no today to be thankful for.
>


-- 
Collins Richey
     If you fill your heart with regrets of yesterday and the worries
     of tomorrow, you have no today to be thankful for.