<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
Sounds good to me, but will we be abe to get some "hands on" experience?<br>
<br>
David Willson wrote:<br>
<blockquote type="cite" cite="mid1051145668.1272.473.camel@atlanta">
<pre wrap="">K. Next Linux Fun-da-mentals is this "poor man's ghost" process. Sound
good, y'all?
See you May 7th.
On Wed, 2003-04-23 at 18:31, Joe Linux wrote:
</pre>
<blockquote type="cite">
<pre wrap="">It would be nice if old f**ts like me could get some hands on lessons on
stuff like this at a future install/learning fest.
David Willson wrote:
</pre>
<blockquote type="cite">
<pre wrap="">The programs you want are 'partimage' and 'parted', preferably run from
a recent Knoppix CD. I've done what you want to do about a dozen times,
though only once with the resizing that I assume you will want.
Here's da process:
1. Boot the reference system from KNOPPIX.
2. Mount a writable network resource.
3. Use 'partimage' to backup the source partition to the mounted
resource.
4. Boot the destination system from a Win98 EBD, a GeekDisk (TM), or
KNOPPIX.
5. Create a primary DOS partition as nearly identical to the source
partition as possible, a few MB bigger won't hurt, but a few MB smaller
might. Pay strict attention to the Active flag! It ~must~ be thrown,
or you'll get unexpected results.
6. Boot from KNOPPIX
7. Mount the network resource.
8. Restore the image to the new partition using 'partimage'.
7. Use 'parted' to expand the partition to the desired size.
8. Reboot from the hard-drive.
Easiest part to screw up is the creation of the new partition. It has
to be active, same or larger, and primary.
On Wed, 2003-04-23 at 14:34, Matt Gushee wrote:
</pre>
<blockquote type="cite">
<pre wrap="">I'm wondering if it is feasible, using some Linux distribution or
other on a floppy or two or three, to:
1. Boot up a machine and connect it to a LAN;
2. Mount a network drive; and
3. Create an image of a local partition on the network drive
i.e., something like:
$ dd if=/dev/hda of=/network/drive/hda1.img
In case you're curious why, I want to copy my wife's Win98 system to
a new hard disk. The machine is a laptop, so we can't readily install
another HD alongside the existing one. And we have the product
recovery CD, but it's not bootable, and the boot floppy seems to be
in a box in her parents' barn in northern Japan.
Has anyone done something like this?
--
Matt Gushee
Englewood, CO USA
_______________________________________________
CLUE-Tech mailing list
<a class="moz-txt-link-abbreviated" href="mailto:CLUE-Tech@clue.denver.co.us">CLUE-Tech@clue.denver.co.us</a>
<a class="moz-txt-link-freetext" href="http://clue.denver.co.us/mailman/listinfo/clue-tech">http://clue.denver.co.us/mailman/listinfo/clue-tech</a>
</pre>
</blockquote>
<pre wrap="">
_______________________________________________
CLUE-Tech mailing list
<a class="moz-txt-link-abbreviated" href="mailto:CLUE-Tech@clue.denver.co.us">CLUE-Tech@clue.denver.co.us</a>
<a class="moz-txt-link-freetext" href="http://clue.denver.co.us/mailman/listinfo/clue-tech">http://clue.denver.co.us/mailman/listinfo/clue-tech</a>
</pre>
</blockquote>
</blockquote>
<pre wrap=""><!---->
_______________________________________________
CLUE-Tech mailing list
<a class="moz-txt-link-abbreviated" href="mailto:CLUE-Tech@clue.denver.co.us">CLUE-Tech@clue.denver.co.us</a>
<a class="moz-txt-link-freetext" href="http://clue.denver.co.us/mailman/listinfo/clue-tech">http://clue.denver.co.us/mailman/listinfo/clue-tech</a>
</pre>
</blockquote>
<br>
</body>
</html>