[CLUE-Tech] VFS issue

[Kevin Cullis]

Brandon N wrote:
> 
> how about the output from dmesg?
> 
> > kevin at cullis:~ > mount
> > /dev/hda3 on / type ext2 (rw)
> > proc on /proc type proc (rw)
> > /dev/hda1 on /boot type ext2 (rw)
> > /dev/hdb1 on /home1 type ext2 (rw)
> > devpts on /dev/pts type devpts (rw,gid=5,mode=0620)
> > usbdevfs on /proc/bus/usb type usbdevfs (rw)
> >
> > Any suggestions would be much appreciated.

Brandon,

Here it is:

VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium III (Katmai) stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch at atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd9b4, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 64000K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 51536H3, ATA DISK drive
hdb: Maxtor 91024U4, ATA DISK drive
hdc: Pioneer CD-ROM ATAPI Model DR-A14S 0104, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: Maxtor 51536H3, 14655MB w/2048kB Cache, CHS=1868/255/63
hdb: Maxtor 91024U4, 9765MB w/2048kB Cache, CHS=1244/255/63
hdc: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
LVM version 0.8e  by Heinz Mauelshagen  (4/1/2000)
lvm -- Driver successfully initialized
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 hda3
 hdb: hdb1
RAMDISK: Compressed image found at block 0
Uncompressing................................done.
VFS: Mounted root (ext2 filesystem).
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 68k freed
Adding Swap: 136544k swap-space (priority -1)
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
usb-uhci.c: $Revision: 1.232 $ time 20:30:31 Aug  2 2000
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: Intel USB controller: setting latency timer to 0
usb-uhci.c: USB UHCI at I/O 0x1440, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
registered device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered
VFS: Disk change detected on device fd(2,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device fd(2,0)
VFS: Disk change detected on device fd(2,0)

Kevin