[CLUE-Tech] VFS issue

[Brandon N]

<snip>
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:DMA
>     ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio
ide1 is your CDROM drive, 

> hda: Maxtor 51536H3, ATA DISK drive
> hdb: Maxtor 91024U4, ATA DISK drive
> hdc: Pioneer CD-ROM ATAPI Model DR-A14S 0104, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: Maxtor 51536H3, 14655MB w/2048kB Cache, CHS=1868/255/63
> hdb: Maxtor 91024U4, 9765MB w/2048kB Cache, CHS=1244/255/63
> hdc: ATAPI 32X CD-ROM drive, 128kB Cache
> Uniform CD-ROM driver Revision: 3.11
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
<snip>
> VFS: Disk change detected on device fd(2,0)
> VFS: Disk change detected on device ide1(22,0)
> VFS: Disk change detected on device fd(2,0)
> VFS: Disk change detected on device fd(2,0)

both of the devices it's detecting are suppose to be removable media,
but I highly doubt your changing disks that quickly.
It sounds like a minor problem, but probably not a hack, I'm not sure
how VFS detects device changes.

Brandon

__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/