[CLUE-Tech] cisco 678 -- web server

jason at matchingmoms.com jason at matchingmoms.com
Sun Feb 10 11:28:16 MST 2002


Here's my configuration, using RedHat 7.1 and Qwest DSL:

                                        _________
                                       | Firewall|
                                       |         |
                                       |    L    |
--               _______               |    I    |
W|              | Cisco |      10.0.0.2|e   N   e|
A|______________|  678  |______________|t   U   t|
L|  63.231.83.57|_______|10.0.0.1      |h   X   h|
L|                                     |1       0|
--                                     |         |
                                       |         |
                                       |__eth0___|
                 _______                    |
                |       |___________________|
                |  Hub  |
                |_______|
                  |   |
                  |   |
  _________       |   |      _________
 | Windows |      |   |     | Linux   |
 |   98    |      |   |     |         |
 |         |      |   |     |    W    |
 |         |      |   |     |    e    |
 |        e|      |   |     |e   b    |
 |        t|------|   |-----|t        |
 |        h|                |h   S    |
 |        0|                |0   e    |
 |         |                |    r    |
 |         |                |    v    |
 |___PPP___|                |_________|
      |
--    |
W|    |
A|____|
L|
L|
--

I can surf the web from all three boxes.  I can also surf the web from my
Windows 98 box through its 56K modem.  My Linux web server serves pages to
all three boxes when summoned using its private address (192.168.0.200).

I can ping 63.231.83.57 and 63.231.83.254 (one of these should be the
outside address of the router) from any box.  However, pointing my browser
from any box to either of these 63.x.x.x addresses causes the browser to
spin and spin.  My httpd and message logs are functioning properly (they
catch messages in other cases, but not here) and show nothing.

Any ideas?  Here's some output from a conversation with my router:

show route
[TARGET]         [MASK]           [GATEWAY]       [M][P] [TYPE]    [IF]
[AGE]
0.0.0.0          0.0.0.0          0.0.0.0          1     SA        WAN0-0
0
10.0.0.0         255.255.255.0    0.0.0.0          1     LA        ETH0
0
63.0.0.0         255.0.0.0        0.0.0.0          1     A         WAN0-0
0

WAN Interfaces...
63.231.83.254    255.255.255.255  0.0.0.0          1     HA        WAN0-0
0

cbos#show nat

cbos#NAT is currently enabled

Port      Network        Global
eth0      Inside
wan0-0    Outside      63.231.83.57
vip0      Outside
vip1      Outside
vip2      Outside

cbos#show errors
- Current Error Messages -
## Ticks        Module     Level      Message
 0 000:00:00:00 ATM        Info       inband management has allocated
connection with vpi 1 and vci 4
 1 000:00:00:00 PPP        Info       IPCP Open Event on wan0-0
 2 000:00:00:13 ATM        Info       Wan0 Up
 3 000:00:00:13 PPP        Info       PPP Up Event on wan0-0
 4 000:00:00:18 PPP        Info       LCP open on wan0-0
 5 000:00:00:18 PPP        Info       PAP authentication failed on wan0-0;
received NAK
 6 000:00:00:23 PPP        Info       PPP Down Event on wan0-0
 7 000:00:00:30 PPP        Info       PPP Up Event on wan0-0
 8 000:00:00:30 PPP        Info       LCP open on wan0-0
 9 000:00:00:30 PPP        Info       IPCP Negotiated IP Address
63.231.83.57
10 000:00:00:30 PPP        Info       IPCP Negotiated IP Subnet Mask
255.255.255.0
Total Number of Error Messages: 11





More information about the clue-tech mailing list