[CLUE-Tech] CLUE: DSL - PCISYS

[Timothy C. Klein]

* Matt Gushee (mgushee at havenrock.com) wrote:
> On Thu, Jul 04, 2002 at 10:54:39AM -0600, Timothy C. Klein wrote:
> 
> > > > What kind of DB loss (is that what it is called?) to you get on your
> > > > line.
> > > 
> > > Tell me how to measure it, and I'll let you know.
> > 
> > It is a function of the CBOS.  I can't seem to find my Cisco manual
> > right now.  I think it *might* 'show stats'.
> 
> No, that's not it (I'm trying to figure this out too). 'show' and
> 'stats' are separate commands. I thought 'show errors' might do it, but
> no such luck.

Yup, your are right.  Finally found my manual.  It didn't help at all.
So I had to find that serial cable and kermit into the darn thing.

It is 'show errors' that gave it to me. I got the following lines with line
quality:

 4 000:00:00:11 ATM        Info       Wan0 Up*, +4.9 dB TX Power,
	+15.7 dB Rem TX Power, 27 dB RX Gain, No Change Margin
 5 000:00:00:11 ATM        Info       Wan0 Up*, 39 dB Line Quality
...
10 000:01:50:40 ATM        Info       Wan0 Up*, +4.9 dB TX Power,
	15.7 dB Rem TX Power, 27 dB RX Gain, No Change Margin
11 000:01:50:40 ATM        Info       Wan0 Up*, 40 dB Line Quality

Don't know why it is in there twice.  So guess I am at 39.5 dB,
depending on the time of the day.  If I am remembering the numbers
correctly, 39 id fairly good.  I think the minimum is 30.

Tim
--
==============================================
== Timothy Klein || teece at silverklein.net   ==
== ---------------------------------------- ==
== "Hello, World" 17 Errors, 31 Warnings... ==
==============================================