[CLUE-Tech] CLUE: DSL - PCISYS

[Frank Whiteley]

----- Original Message -----
From: "Timothy C. Klein" <teece at silverklein.net>
To: <clue-tech at clue.denver.co.us>
Sent: Thursday, July 04, 2002 3:09 PM
Subject: Re: [CLUE-Tech] CLUE: DSL - PCISYS


> * Matt Gushee (mgushee at havenrock.com) wrote:
> > On Thu, Jul 04, 2002 at 10:54:39AM -0600, Timothy C. Klein wrote:
> >
> > > > > What kind of DB loss (is that what it is called?) to you get on
your
> > > > > line.
> > > >
> > > > Tell me how to measure it, and I'll let you know.
> > >
> > > It is a function of the CBOS.  I can't seem to find my Cisco manual
> > > right now.  I think it *might* 'show stats'.
> >
> > No, that's not it (I'm trying to figure this out too). 'show' and
> > 'stats' are separate commands. I thought 'show errors' might do it, but
> > no such luck.
>
> Yup, your are right.  Finally found my manual.  It didn't help at all.
> So I had to find that serial cable and kermit into the darn thing.
>
> It is 'show errors' that gave it to me. I got the following lines with
line
> quality:
>
>  4 000:00:00:11 ATM        Info       Wan0 Up*, +4.9 dB TX Power,
> +15.7 dB Rem TX Power, 27 dB RX Gain, No Change Margin
>  5 000:00:00:11 ATM        Info       Wan0 Up*, 39 dB Line Quality
> ...
> 10 000:01:50:40 ATM        Info       Wan0 Up*, +4.9 dB TX Power,
> 15.7 dB Rem TX Power, 27 dB RX Gain, No Change Margin
> 11 000:01:50:40 ATM        Info       Wan0 Up*, 40 dB Line Quality
>
> Don't know why it is in there twice.  So guess I am at 39.5 dB,
> depending on the time of the day.  If I am remembering the numbers
> correctly, 39 id fairly good.  I think the minimum is 30.
>
It's in there twice because your service went down and up again.

Try

show int wan0

This will display your wan0 stats

Frank Whiteley
Greeley