[CLUE-Tech] Port Forwarding / routing w/ cisco 678

[Dave Price]

On Thu, Apr 15, 2004 at 10:06:33AM -0600, Mike Staver wrote:
> I had the exact same problem with an ActionTec router (pile of crap if 
> you ask me) when I first set up my DSL connection. I could only see the 
> website I was forwarding to from outside, not in.  From inside, I could 
> only see the web admin interface for the router - and I never figured 
> out how to fix that, and yet be able to update the router config.  I 
> like my Cisco much better.  I wonder if you could do this - erase your 
> nvram on it and start over.  It sounds drastic, but I would think that 
> it would eliminate any unknowns if you did that.

Yes, that is a bit drastic - is there a way to save save the original
config to another box on on a 678 via ftp or tftp just in case.

Also,  I should point out that I did not originally set up this 678 and
it is using a ppp conection - if that makes any difference

aloha,
dave