[CLUE-Tech] Networking

Russell Glissmann rglissmann at rfgsolutions.com
Sun Jan 4 16:48:25 MST 2004


Nate;
On my primary system, using an on-board lan (Broadcom) mii-tool reports:
eth0:
eth0: negotiated 100baseTx-FD flow-control, link ok
  product info: vendor 00:10:18, model 54 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
flow-control
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
flow-control
On my other system using a 3-Com 3c905TX, mii-tool reports: 
eth0: negotiated, link ok
  product info: vendor 00:00:00, model 0 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 10baseT-FD
  link partner: 100baseTx-HD 10baseT-HD
eth1: negotiated 100baseTx-FD, link ok
  product info: vendor 00:10:18, model 18 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
flow-control
eth1 not being used at this point, I'm in the process of building this
system to be a firewall.  Not sure if there is anything there
significant.

Thanks!
On Sat, 2004-01-03 at 18:13, Nate Duehr wrote:
> On Saturday, Jan 3, 2004, at 15:41 America/Denver, Russell Glissmann 
> wrote:
> 
> > from the Internet versus my local LAN.  I've noticed that on my second
> > switch the collision light is constantly flashing when downloading from
> > machine to machine.  That may be a clue, but I have no idea what the
> > clue means!
> > Thanks for any ideas!
> 
> Russ, lots of collisions could indicate a machine in the wrong duplex 
> mode.  What types of ethernet cards are in the machines and what does 
> mii-tool show for their settings?
> 
> --
> Nate Duehr, nate at natetech.com
> 
> _______________________________________________
> CLUE-Tech mailing list
> Post messages to: CLUE-Tech at clue.denver.co.us
> Unsubscribe or manage your options: http://clue.denver.co.us/mailman/listinfo/clue-tech
> 




More information about the clue-tech mailing list