[clue] LAMP + Nagios on Pi?

foo7775 at comcast.net foo7775 at comcast.net
Wed Jun 10 08:39:39 MDT 2015


Thanks for the reply Mike, that's good to know. 'Checking remote services' should be fine for what I need to do here, although sooner or later I'll probably try one or two more-intensive checks, just to see how feasible they are. If you don't mind, I might email you off-list for the occasional "detail" question, but I'm actually setting up Nagios to monitor my primary network segment before the Pi arrives, so with any luck I will have worked through most of those issues before I start installing it on the Pi. I'm *hoping* to be able to work on setting up the Pi this weekend. 

The LAMP part of the question was simply that one of the Nagios install guides that I found stated that LAMP had to be installed before Nagios (which surprised me). Given the RPi's modest specs, I started wondering how much "reserve capacity" the system would have after running all of that... 

Thanks again. 

----- Original Message -----

From: "Mike Nolte" <obiwanmikenolte at gmail.com> 
To: "CLUE's mailing list" <clue at cluedenver.org> 
Sent: Wednesday, June 10, 2015 7:43:32 AM 
Subject: Re: [clue] LAMP + Nagios on Pi? 

I have a G1 model B that's been running Nagios on Red Sleeve 6.1 for a couple of years. The checks work fine, but they just test remote services; I wouldn't try anything that requires a lot of local processing. I can't think of any reason that the processor architecture would come into play. What was painful for me is how long it took to actually change the configuration. I ultimately used a VM, and I use the Pi to check the VM and host. The G2 says that the processor is 200 MHz faster, and it has twice as much RAM, so it might be tolerable now. 

What's the LAMP part of your question? 

On Tue, Jun 9, 2015 at 11:14 PM, < foo7775 at comcast.net > wrote: 



Hey guys (& gals), 

I'm giving serious thought to setting up a "latest generation" Raspberry Pi as a headless server running Nagios so that I can quickly & easily check up on one segment of my home network when/if the mood strikes me. Has anyone on this list set up Nagios on a Pi system, & if so, do you have any suggestions, or any "gotchas" to watch out for?? (Aside from the obvious ARM architecture as opposed to x86/64...) 

It may be worth noting that I will be setting it up to boot RedSleeve (RHEL-derived) instead of the Debian-derived OS that it comes with... 

Thanks in advance, 

T. 

_______________________________________________ 
clue mailing list: clue at cluedenver.org 
For information, account preferences, or to unsubscribe see: 
http://cluedenver.org/mailman/listinfo/clue 





_______________________________________________ 
clue mailing list: clue at cluedenver.org 
For information, account preferences, or to unsubscribe see: 
http://cluedenver.org/mailman/listinfo/clue 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://cluedenver.org/pipermail/clue/attachments/20150610/acd6afc8/attachment-0001.html 


More information about the clue mailing list