[CLUE-Tech] Simple Keyboard Question

[Dusty Campbell]

I have an MS Natural Keyboard with a standard PS/2 plug.

I also tried another MS PS/2 keyboard with the same results.  The keyboard 
will also work through the boot loader so I think that I have something 
either incorrect in one of the boot scripts or perhaps in the kernal.

Thanks.

At 12:28 AM 9/16/2002 -0600, you wrote:
>Dusty:
>
> > run.  However, once the login prompt is shown I get no response from the
> > keyboard.  I thought it was the keybard map set in rc.conf but I have that
>
>Do you have a standard PC/AT or PS/2 keyboard that plugs into the 8042
>keyboard controller?  Or do you have a USB keyboard?
>
>If you have a USB keyboard and it works under the BIOS, but it doesn't work
>when Linux is running, your problem is the Linux USB drivers & USB 
>subsystem.
>(Although it would be unusual for it to not work, I think.)
>
>If you have a keyboard with a regular interface, and it works under the BIOS,
>but doesn't work under Linux, then this is more difficult to troubleshoot.
>
>What keyboard hardware is it?  Standard generic whitebox?  MS Natural
>Keyboard?  Dvorak?
>
>Sorry I'm not more help - all I have are more questions...
>
>--
>Jim Ockers (ockers at ockers.net)
>Contact info: please see http://www.ockers.net/
>
>Fight Spam! Join CAUCE (Coalition Against Unsolicited Commercial Email)
>at http://www.cauce.org/ .
>
>_______________________________________________
>CLUE-Tech mailing list
>CLUE-Tech at clue.denver.co.us
>http://clue.denver.co.us/mailman/listinfo/clue-tech