[clue-tech] Failing drive [was Re: virtualization]
Maxwell Spangler
maxlists at maxwellspangler.com
Sat Jul 31 20:04:41 MDT 2010
On Sat, 2010-07-31 at 06:50 -0600, Jim Ockers wrote:
> Could you please post the results of "smartctl -a /dev/hdX" for your
> hard drive? I am interested to see the SMART information and extended
> attributes (with counters) to see what this drive failure might "look"
> like on the SMART output.
>
> I am working on a large scale disk testing and failure analysis
> project. (Not as large scale as google's, and specific to our usage,
> but they are similar in concept.) Also I do SMART monitoring for my
> own hard drives and in fact it was the SMART hard drives that informed
> me that the internal fans had failed in one of my cases because the
> drives were 60C (way overheated) and claiming they were about to fail.
Hi Jim,
smartctl 5.39.1 2010-01-28 r3054 [x86_64-redhat-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12 family
Device Model: ST3750528AS
Serial Number: 9VP420DS
Firmware Version: HP34
User Capacity: 750,156,374,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Jul 31 19:57:21 2010 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 149) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 114 099 006 Pre-fail Always
- 76516893
3 Spin_Up_Time 0x0023 095 095 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 68
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 3
7 Seek_Error_Rate 0x002f 069 060 030 Pre-fail Always
- 7482307
9 Power_On_Hours 0x0032 099 099 000 Old_age Always
- 1700
10 Spin_Retry_Count 0x0033 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 45
180 Unused_Rsvd_Blk_Cnt_Tot 0x002b 100 100 000 Pre-fail Always
- 3769
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always
- 0
187 Reported_Uncorrect 0x0032 092 092 000 Old_age Always
- 8
188 Command_Timeout 0x0032 100 097 000 Old_age Always
- 262150
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 064 057 045 Old_age Always
- 36 (Lifetime Min/Max 23/36)
194 Temperature_Celsius 0x0022 036 043 000 Old_age Always
- 36 (0 16 0 0)
195 Hardware_ECC_Recovered 0x003a 055 038 000 Old_age Always
- 76516893
196 Reallocated_Event_Count 0x0032 100 100 036 Old_age Always
- 3
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 101 (device log contains only the most recent five
errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 101 occurred at disk power-on lifetime: 1668 hours (69 days + 12
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 12 d9 30 09 Error: UNC at LBA = 0x0930d912 = 154196242
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 0b d9 30 e9 00 00:12:16.756 READ VERIFY SECTOR(S) EXT
42 00 00 00 d8 30 e9 00 00:12:13.679 READ VERIFY SECTOR(S) EXT
42 00 00 00 58 2c e9 00 00:12:12.369 READ VERIFY SECTOR(S) EXT
42 00 00 00 68 1c 49 00 00:12:07.756 READ VERIFY SECTOR(S) EXT
42 00 00 00 b0 14 e9 00 00:12:05.538 READ VERIFY SECTOR(S) EXT
Error 100 occurred at disk power-on lifetime: 1668 hours (69 days + 12
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 0a d9 30 09 Error: UNC at LBA = 0x0930d90a = 154196234
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 00 d8 30 e9 00 00:12:13.679 READ VERIFY SECTOR(S) EXT
42 00 00 00 58 2c e9 00 00:12:12.369 READ VERIFY SECTOR(S) EXT
42 00 00 00 68 1c 49 00 00:12:07.756 READ VERIFY SECTOR(S) EXT
42 00 00 00 b0 14 e9 00 00:12:05.538 READ VERIFY SECTOR(S) EXT
42 00 00 00 c0 04 49 00 00:12:00.925 READ VERIFY SECTOR(S) EXT
Error 99 occurred at disk power-on lifetime: 1666 hours (69 days + 10
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 12 d9 30 09 Error: UNC at LBA = 0x0930d912 = 154196242
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 0b d9 30 e9 00 04:09:02.087 READ VERIFY SECTOR(S) EXT
42 00 00 00 d8 30 49 00 04:08:59.034 READ VERIFY SECTOR(S) EXT
42 00 00 00 90 2f e9 00 04:08:58.669 READ VERIFY SECTOR(S) EXT
42 00 00 00 a0 1f e9 00 04:08:54.062 READ VERIFY SECTOR(S) EXT
42 00 00 00 b0 0f e9 00 04:08:49.458 READ VERIFY SECTOR(S) EXT
Error 98 occurred at disk power-on lifetime: 1666 hours (69 days + 10
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 0a d9 30 09 Error: UNC at LBA = 0x0930d90a = 154196234
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 00 d8 30 49 00 04:08:59.034 READ VERIFY SECTOR(S) EXT
42 00 00 00 90 2f e9 00 04:08:58.669 READ VERIFY SECTOR(S) EXT
42 00 00 00 a0 1f e9 00 04:08:54.062 READ VERIFY SECTOR(S) EXT
42 00 00 00 b0 0f e9 00 04:08:49.458 READ VERIFY SECTOR(S) EXT
42 00 00 00 c0 ff e8 00 04:08:44.828 READ VERIFY SECTOR(S) EXT
Error 97 occurred at disk power-on lifetime: 1662 hours (69 days + 6
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d4 01 81 4f c2 a0 00 00:00:51.327 SMART EXECUTE OFF-LINE
IMMEDIATE
b0 d0 01 00 4f c2 a0 00 00:00:51.016 SMART READ DATA
b0 d8 01 00 4f c2 a0 00 00:00:51.015 SMART ENABLE OPERATIONS
b0 d0 01 00 4f c2 a0 00 00:00:47.592 SMART READ DATA
b0 d8 01 00 4f c2 a0 00 00:00:47.591 SMART ENABLE OPERATIONS
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1678
-
# 2 Short offline Completed without error 00% 1675
-
# 3 Short offline Completed: read failure 90% 1675
154196234
# 4 Short captive Completed: read failure 90% 1662
154196234
# 5 Short captive Completed: read failure 90% 1661
154196234
# 6 Extended captive Completed: read failure 90% 1661
154196234
# 7 Short captive Completed: read failure 90% 1661
154196234
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
--
Maxwell Spangler
========================================================================
Linux, Unix and Database Administration
Currently: Boulder, Colorado
LinkedIn: http://www.linkedin.com/in/maxwellspangler
More information about the clue-tech
mailing list